Welcome to All-New
Experience in Chlorination
Leave behind traditional water disinfection methods such as high-risk chlorine gas or expensive commercial hypochlorite; revolutionize every aspect of your chlorination process with HypoX® Onsite Brine ElectroChlorination Technology!
Produce Your Own Chlorine in Your Own Place!
HypoX® is an industry-leading Brine ElectroChlorination technology that allows you to produce and dose your own chlorine (NaOCl) in your own place.
HypoX® Needs Only Salt, Water and Electricity.
HypoX® produces NaOCl simply by electrolyzing brine solution. This innovative approach means that all you need to generate chlorine in the required amounts is salt, water, and electricity.
HypoX® is Designed to Produce at the Point of Consumption.
Since HypoX® produces low-concentration chlorine suitable only for on-site consumption and not for transportation, it is installed at the chlorine consumption point with all equipment and instruments.
Every Chlorine is not Same!
Different types of chlorine have unique chemical properties and behaviors in oxidation and disinfection applications, influenced by their production methods, pH levels, chemical compositions, and how they perform in specific applications.
NaOCl and Mix Oxidant Rich NaOCl produced by HypoX® stands out by offering a highly effective chlorine solution compared to traditional ones. Understanding these differences and recognizing how HypoX® maximizes effectiveness in each application are crucial for selecting the optimal solution for your needs, ensuring superior performance and reliability.
Chlorine Concentration is the Difference
Chlor-alkali plants typically produce all types of chlorine at the highest possible concentrations due to transportation and storage requirements. However, high-concentration chlorine degrades faster, loses potency during transit, and poses greater safety risks. HypoX® produces low-concentration NaOCl on-site, ensuring maximum freshness and effectiveness at the point of use.
Caustic Concentration is the Difference
Although both commercial and on-site produced sodium hypochlorite are referred to as NaOCl, their production methods result in vastly different caustic (NaOH) levels. Commercial NaOCl carries excess caustic from the manufacturing process, which raises pH and reduces disinfection efficiency. HypoX® generates NaOCl with minimal residual caustic, delivering a cleaner and more effective chlorine solution.
pH Level is the Difference
Chlorine is not a one-size-fits-all solution, and one of the primary reasons for this is how chlorine interacts with other components at different pH levels. The disinfection power of chlorine is directly tied to pH — lower pH means more hypochlorous acid (HOCl), the active killing agent. HypoX® produces NaOCl at a near-neutral pH, maximizing HOCl content and delivering superior microbial inactivation.
Oxidant Power is the Difference
Mix-oxidant-rich onsite-produced NaOCl contains much more oxidizing components than chlorine gas or commercial hypochlorite. These additional oxidants — including chlorine dioxide and ozone traces — work synergistically to break down biofilms, eliminate resistant pathogens, and reduce disinfection byproducts. HypoX® harnesses this multi-oxidant chemistry to deliver unmatched water treatment performance.
The Production of
NaOCl
HypoX H-type is the standard On-site Sodium Hypochlorite Generator which is well known as OSG. This model produces 0.8% NaOCl with standard MMO electrode coating and process parameters by using salt, water & electricity.
The Production of Mix Oxidant Rich NaOCl
HypoX O-type is the advance Mix-Oxidant Rich NaOCl generator as it produces the most effective form of NaOCl with 0.5-0.6% concentration with updated catalyst coatings and process parameters by using salt, water & electricity.
The Most Effective Form of NaOCl
Mix oxidants naturally occur besides NaOCl during electrolysis process, thanks to HypoX® O-type's unique catalyst mixture and updated process parameters developed by Kemisan.
O-Type is capable of generating additional oxidants from the 4-ions.
We have ingredients of Sodium(Na) and Chlorine(Cl) from salt and we have Hydrogen(H) and Oxygen(O) from water. Even we have the same 4 ingredients, we can produce more powerful NaOCl with O-type electrolyzers when compared with standard H-Type electrolyzers. Because we can produce oxidant richer NaOCl from the same ingredients.
Less Concentration of O-type is enough for the same disinfection.
HypoX O-Type is achieved to inactivate Escherichia Coli in 30 seconds (ATCC 10536) with 0,3 ppm chlorine concentration, and H-type inactivates it with 0,4 ppm whereas Chlorine gas made it with 0,5 ppm.
O-Type is strong enough to solve the biggest water quality problems.
Oxidant rich NaOCl produced by HypoX O-Type is powerful enough to solve almost all water quality problems. HypoX O-Type guarantees to eliminate and control biofilm, taste & odor, iron & manganese problems, reduce DBP's, give longer residual chlorine and much more…
Biofilm
Eliminate & Prevent Reoccurrence of Biofilm Problems with O-type
Taste & Odor
O-type Eliminates Bad Taste & Odor Problems
Residual Chlorine
Read Residual Chlorine in Longer Kilometers with O-type
Disinfection By-product
Same Effect with Lower Dosage of O-type, thus Lower DBPs
Iron & Manganese
Better and Easier Ir & Mn Oxidation with O-type
Arsenic
Better and Easier Arsenic Oxidation with O-type
Flocculant
Better Oxidation with Less Flocculant Usage with O-type
Chlorite & Chlorate
No Chlorite or Chlorate Occurrence during O-type dosing
Legionella
Preventing Bacterial Epidemics with O-type
Crop Disease
Preventing Crop Disease because of Irrigation Water with O-type
Much More Economical Water Disinfection is Possible with HypoX®
By producing chlorine on-site using only salt and electricity, you can significantly reduce operational costs of your chlorination process, enabling rapid payback of your HypoX® investment and long-term economic benefits thereafter!
Compared to Chlorine Gas; 50% – 70%Less OPEX
Although chlorine gas offers a lower apparent unit cost, associated indirect but mandatory expenses such as neutralization systems, evaporator power consumption etc. and costly cylinder renewal and replacement result in higher overall operating costs. By transitioning to on-site generation, operators can achieve an average OPEX reduction of approximately 50% - 70%.
Compared to Commercial Sodium Hypochlorite Up to 90%Less OPEX
Commercial sodium hypochlorite (NaOCl), produced using chlorine gas and caustic soda, carries a significantly higher unit cost compared to on-site generation. In addition, its high water content—typically around 85%—makes transportation expensive and inefficient.
Don't Underestimate the Hidden Cost: Concentration Loss
Analytical studies show that under storage conditions of 25 °C, commercial sodium hypochlorite loses approximately 22% of its active concentration within two months. At 36 °C, this degradation accelerates significantly, reaching up to 64% over the same period. In contrast, HypoX® produces chlorine on demand, ensuring a consistently fresh product at peak concentration.
Compared to Hypochlorous Acid Generator 70% – 90%Less OPEX
Membrane-based on-site hypochlorous acid generators consume at least twice as much salt and at least 4 times more electricity compared to on-site electrochlorination systems. In addition, due to their high sensitivity to salt quality, maintenance and replacement costs are significantly higher.
Compared to Chlorine Dioxide 70% – 95%Less OPEX
While chlorine dioxide must be produced on-site due to safety risks, the high cost of its precursor chemicals, sodium chlorite and hydrochloric acid, leads to significantly higher operating costs.
Keep Safe Your Personnel
Since HypoX® produces chlorine in the form of sodium hypochlorite (NaOCl) at concentrations below 1%, it is not classified as a hazardous substance according to EPA and WHO standards. Therefore, it poses minimal risk to personnel during use and not even require the use of gas mask, differing from highly dangerous chlorine gas.
Keep Safe All Modes of Transportation
Since chlorine gas has highly dangerous chemical, it can cause serious safety risk for people during transportation, use or storage. HypoX® is developed for on-site production and consumption as needed, completely eliminating the risks associated with transportation, handling, and storage of dangerous chemicals. And, you can keep safe not only your facility but also all roads & community.
Keep Safe the Entire City
Especially in recent years, with population growth, drinking water facilities located outside the city have been brought into the city center. This shift has been a major reason why many facilities are turning to alternative chlorination methods that do not carry the risks associated with chlorine gas.
50% – 70% Less Transportation Related Carbon Emission
With HypoX®, you transport only salt instead of tons of hazardous chlorine gas cylinders or commercial hypochlorite solutions that are over 85% water, reducing logistics and cutting your transportation-related carbon emission by 50% – 70%.
End Chemical Supply Dependency
Relying on external chlorine supplies can be risky. When unexpected global events such as natural disasters or pandemics disrupt production and supply chains, continue producing your own chlorine using only salt—and maintain an independent, reliable water disinfection system.
Less Dependency on the Limited Vendors & Unstable Prices
Depending on a limited number of chlorine vendors exposes you to unpredictable and volatile pricing. By producing chlorine on-site using only salt, you gain cost stability and protect your operations from sudden price increases.
Our Secret for Long Years of 99.9% Up Time
What truly matters to us is not how many plants we sell, but how many of our plants are still operating successfully with 99.9% run-time even after many years. Let's discover how we do it for 50 years!
100% In-house Electrolyzer!
Kemisan is the independent owner and manufacturer of the core electrolysis technology: Electrode Catalytic Coating, which is crucial for the service life and performance of the plants. Unlike other companies that lack this technological capability and rely on third-party vendors for the heart of the system, Kemisan carries out all electrolyzer engineering and electrode catalytic coating processes 100% in-house. This ensures superior quality and complete control over the system's core.
Single Designer & Supplier: No Middleman
We never allow middleman companies to design and supply some portion of our plants to prevent failures or full stop caused by inharmonious components and equipments, conflicts of guarantee responsibilities, imperfect installation and commissioning and so on.
Perfect Harmony of Designing Every Unit All Together
Kemisan independently conducts all design, engineering, and manufacturing activities in-house with a holistic approach, ensuring that every component is designed and produced as part of a seamlessly integrated system. Therefore, Kemisan serves as the single point of authority for all its products and their each components.
50 Years Experience in Electrolysis & Process Design
Kemisan's deep-rooted expertise in R&D, engineering and manufacturing process of electrolysis technology—born into it and dedicated solely to its advancement for 50 years. With dedicated focus and commitment, we continuously push the boundaries of electrolysis innovation every single day since 1976.
Dedicated Technical Service by Designer
Kemisan® is one of the few manufacturers in the industry that provides both direct and designer-approved technical after-sales support. Our commitment to excellence guarantees reliable, expert assistance from our professional Technic Team—both during and beyond the warranty period.
Perfect Installation & Smooth Commissioning
Kemisan provides direct or approved representative services for the installation and commissioning of ElectroChlorination plants. Our goal is to deliver a smooth and efficient setup, ensuring your system is ready to perform at its best from the beginning.
Complete Personal Training
We believe that the perfection of system and process starts with well-trained personnel. Kemisan Academy ensures that your team will be fully prepared with the knowledge and skills necessary to handle all aspects of system operation and maintenance, leading to enhanced performance and reduced downtime of ElectroChlorination systems.
Central Spare Part Bank for Each
We don't just build electrochlorination plants—we sustain them for a lifetime. Every bolt, pump, or valve has a guaranteed backup, sourced or replaced by us, so you never have to search elsewhere. While others leave you chasing suppliers, we ensure seamless operation with a one-stop spare part solution. Reliability isn't an option—it's our promise.